The NC12/SOCO is our simple to use, cost effective, bed or chair exit device. In the model number we have “SO” which is short for Solo and “CO” which is short for Controller.
For ease of use and maintenance no batteries are required as it has its own power supply ( PSU ).
Instructions on use
‘Simplicity’ is the buzz-word with the NC12/SOCO and its use is as easy as A, B, C.
A, Seat or lay the user on the sensor pad
B, Plug in the PSU
C, Plug the connecting lead into nursecall call point
The NC12/SOCO is now fully operational and will trigger when the service user shifts their weight off the sensor pad.
To reset the nursecall system
1, Return service user to the bed or chair and press the “reset button” on the nursecall system’s call point.
2, Unlpug the lead connecting it to the nursecall system and press the “Reset button” as above.
It is good practice to unplug both the PSU and the nursecall connecting lead when not in use.
In the event of the PSU being accidently disconnected or unplugged when it is in use, it will bring a call up onto the nursecall system as if the service user had exited from the bed or chair. This is a “fail-Safe” feature.
For further help contact Vince on 01257 483733